An LED lightbox display stand with a colour-changing frame
A standard lightbox lights the graphic. illumiGLOW adds a second layer of light around it.
Inside the frame, LED strips run vertically along both sides (18 LEDs per metre, 6500K daylight) and
light your fabric print evenly from edge to edge. Outside, the RGB frame adds colour, movement or a
clean white border around the whole display.
Graphics are printed on backlit SEG fabric using dye-sublimation, designed to diffuse light evenly
for vivid, consistent colour. The silicone edge pushes into the frame channel, so changing artwork
between events takes minutes.
Full lighting control from one remote
The RGB frame is set from the supplied handheld remote. No app or software is needed.
-
Colour selection: Pick any colour from the touch-sensitive colour ring, or step
through seven presets: red, orange, yellow, green, cyan, blue and purple.
-
Dynamic effects: More than 60 colour effects and lighting modes, including a
gradual colour fade, to add movement around the frame.
-
Brightness and speed: Turn the frame up for a busy hall or down for a quieter
room, and set how fast effects run.
-
Saturation: Go from bold, vivid colour to a soft tint that sits quietly around
your graphic.
-
White light: Switch to white when you want a clean, neutral look, adjustable
from warmer to cooler tones.
-
Four-zone group control: Organise multiple illumiGLOW frames into four zones and
control them from one remote, so every frame in a zone shows the same colour or effect at the
same time.
The 2.4GHz RF remote control is supplied with every unit
(requires 2 x AA batteries, not included).
Two heights from one frame
The frame is supplied at 1m x 2.4m, a popular height with UK exhibitors for
visibility above crowd level. Remove the centre frame sections and it becomes a
1m x 2m lightbox for lower ceilings, smaller stands or retail spaces.
Each height uses its own graphic, so you can start with one size and add a second graphic later.
Single or double-sided lightbox
For a lightbox seen from both sides, choose double-sided: two printed backlit
graphics, both illuminated.
For a lightbox against a wall or at the back of a stand, choose single-sided:
one printed graphic on the front and an unprinted blockout liner on the reverse. The liner stops
light escaping through the back and directs it through your artwork for a brighter front face.
Built for exhibitions, events and retail
Use one unit as a freestanding lightbox beside your counter, at a stand entrance or in a store
window. For a longer run, place several units side by side and group their RGB frames in the same
zone so the colours and effects move together across the stand.
Tool-free assembly and a protective wheeled case
Assembly is tool-free, using easy-latch connections and integrated twist-out feet. When the event
is over, the frame packs into a heavy-duty ABS hard-shell case with protective EVA foam inserts,
wheels and carry handles, so it travels and stores safely between shows.
What's included
-
Aluminium illumiGLOW frame with internal LED backlighting and 40mm RGB illuminated outer frame
(configurable to 1m x 2m or 1m x 2.4m)
- Integrated twist-out feet
- Support rod to keep the graphic taut
- Power supply with 2m mains cable (EU plug with UK adapter)
- 2.4GHz RF remote control (2 x AA batteries not included)
- Single-sided: 1 x printed backlit SEG graphic + 1 x unprinted blockout liner
- Double-sided: 2 x printed backlit SEG graphics
- Heavy-duty ABS hard-shell case with EVA foam inserts, wheels and handles
Frequently Asked Questions
Frequently asked questions
What's the difference between this and the RGB Illuminated Frame version?
Both versions have the same colour-changing RGB outer frame. This version also includes internal LED backlighting, so the printed graphic itself is illuminated. The RGB Illuminated Frame version lights the frame only and costs less.
Can I use it at both 2m and 2.4m tall?
Yes. The frame is supplied at 1m x 2.4m and can be converted to 1m x 2m by removing the centre frame sections. You will need a graphic in each size you want to use.
Should I choose single or double-sided?
Choose double-sided if people will see both sides. For single-sided use, we supply a blockout liner for the reverse, which prevents light from escaping through the back and helps make the front graphic brighter.
Can I control several units together?
Yes. Up to four zones can be controlled from one remote, so a row of illumiGLOW lightboxes can display the same frame colour or effect at the same time.
Can I link units together?
Each illumiGLOW is freestanding on its own feet. For a wider display, place multiple units side by side and group them within the same lighting zone.
Can it be used outdoors?
No. The lighting is rated IP20 and is designed for indoor venues.
What power does it need?
A standard mains socket. The unit draws 216W and comes with a 2m power cable fitted with an EU plug and a UK adapter.
How long does production take?
Typically around 4 working days from artwork approval. See the production lead time status on the product page for the latest production timelines.
