illumiGLOW RGB Illuminated Frame Display Stand - 1m Wide

An illuminated display stand where the frame does the work

Most illuminated displays light the graphic. illumiGLOW lights the edge instead: a 40mm diffused RGB frame runs around the whole perimeter of your print, turning a standard fabric display into something people notice from the aisle.

Your artwork is printed on polyester stretch SEG fabric using dye-sublimation, giving a smooth, tensioned face with sharp detail. The silicone edge pushes into the frame channel, so swapping graphics between events takes minutes. Without internal backlighting, the unit draws 108W, half the power of the backlit LED lightbox version.

Full lighting control from one remote

Everything is set from the supplied handheld remote. No app or software is needed.

• Colour selection: Pick any colour from the touch-sensitive colour ring, or step through seven presets: red, orange, yellow, green, cyan, blue and purple.
• Dynamic effects: More than 60 colour effects and lighting modes, including a gradual colour fade, to add movement around the frame.
• Brightness and speed: Turn the frame up for a busy hall or down for a quieter room, and set how fast effects run.
• Saturation: Go from bold, vivid colour to a soft tint that sits quietly around your graphic.
• White light: Switch to white when you want a clean, neutral look, adjustable from warmer to cooler tones.
• Four-zone group control: Organise multiple illumiGLOW frames into four zones and control them from one remote, so every frame in a zone shows the same colour or effect at the same time.

The 2.4GHz RF remote control is supplied with every unit (requires 2 x AA batteries, not included).

Two heights from one frame

The illumiGLOW 1m frame is supplied at 1m x 2.4m, a popular height with UK exhibitors for visibility above crowd level. Remove the centre frame sections during assembly and it becomes a 1m x 2m display for lower ceilings, smaller stands or retail spaces.

Each height uses its own graphic, so choose the size you need now and add a second graphic later if you want to use both configurations.

Built for exhibitions, events and retail

Use a single unit as a light-up statement piece beside your counter or at a venue entrance. For a longer run, place several units side by side and group them in the same zone, so the frames change colour and run effects together across the whole stand.

Because the frame and graphic are separate, the same display works for years of campaigns: keep the hardware and change the print.

Single or double-sided graphics

illumiGLOW is a double-sided frame. Choose double-sided graphics when the display will be seen from both sides, for example in an open-plan stand or a shop floor. Choose single-sided graphics when the display stands against a wall or backs onto your stand, and the reverse will not be on view.

Tool-free assembly and a protective wheeled case

Assembly is tool-free, using easy-latch connections and integrated twist-out feet. When the event is over, the frame packs into a heavy-duty ABS hard-shell case with protective EVA foam inserts, wheels and carry handles, so it travels and stores safely between shows.

What's included

• Aluminium illumiGLOW frame with 40mm RGB illuminated outer frame (configurable to 1m x 2m or 1m x 2.4m)
• Integrated twist-out feet
• Support rod to keep the graphic taut
• Power supply with 2m mains cable (EU plug with UK adapter)
• 2.4GHz RF remote control (2 x AA batteries not included)
• Dye-sublimated polyester stretch SEG graphic: 1 for single-sided, 2 for double-sided
• Heavy-duty ABS hard-shell case with EVA foam inserts, wheels and handles

Frequently Asked Questions