A backlit fabric lightbox with a colour-changing frame
Inside the frame, LED strips run horizontally along the top and bottom
(17 LEDs per metre, 450 lumens per LED, 6500K daylight), lighting the whole width
of your graphic. Outside, the RGB frame gives the backdrop a second layer of light:
hold your brand colour, set a clean white border, or run effects when you want to
draw people in.
Graphics are printed on backlit SEG fabric using dye-sublimation, designed to diffuse
light evenly for rich, consistent colour. The silicone edge pushes into the frame
channel for quick artwork changes between events.
Two widths from one frame
The frame is supplied at 2m x 2m. Remove a frame section during assembly
and it becomes a 1.5m x 2m lightbox, for tighter stand spaces, smaller
venues or retail areas.
Each width uses its own graphic, so you can start with one size and add a second
graphic later.
Full lighting control from one remote
The RGB frame is set from the supplied handheld remote. No app or software is needed.
-
Colour selection: Pick any colour from the touch-sensitive colour ring,
or step through seven presets: red, orange, yellow, green, cyan, blue and purple.
-
Dynamic effects: More than 60 colour effects and lighting modes,
including a gradual colour fade, to add movement around the frame.
-
Brightness and speed: Turn the frame up for a busy hall or down for
a quieter room, and set how fast effects run.
-
Saturation: Go from bold, vivid colour to a soft tint that sits quietly
around your graphic.
-
White light: Switch to white when you want a clean, neutral look,
adjustable from warmer to cooler tones.
-
Four-zone group control: Organise multiple illumiGLOW frames into four
zones and control them from one remote, so every frame in a zone shows the same colour
or effect at the same time.
The 2.4GHz RF remote control is supplied with every unit
(requires 2 x AA batteries, not included).
Single or double-sided lightbox
For a backdrop seen from both sides, such as an island stand or a room divider, choose
double-sided: two printed backlit graphics, both illuminated.
For a backdrop against a wall or at the back of your stand, choose
single-sided: one printed graphic on the front and an unprinted blockout
liner on the reverse, which keeps light from escaping through the back and makes the
front brighter.
Build a larger illuminated stand
Pair the wide lightbox with illumiGLOW 1m units either side and group their frames in
the same lighting zone. Every frame then changes colour and runs effects together,
controlled from one remote.
Tool-free assembly and a protective wheeled case
Assembly is tool-free, using easy-latch connections and integrated twist-out feet.
When the event is over, the frame packs into a heavy-duty ABS hard-shell case with
protective EVA foam inserts, wheels and carry handles, so it travels and stores safely
between shows.
What's included
-
Aluminium illumiGLOW frame with internal LED backlighting and 40mm RGB illuminated
outer frame (configurable to 1.5m x 2m or 2m x 2m)
- Integrated twist-out feet
- Support rod to keep the graphic taut
- Power supply with 3m mains cable (EU plug with UK adapter)
- 2.4GHz RF remote control (2 x AA batteries not included)
- Single-sided: 1 x printed backlit SEG graphic + 1 x unprinted blockout liner
- Double-sided: 2 x printed backlit SEG graphics
- Heavy-duty ABS hard-shell case with EVA foam inserts, wheels and handles
Frequently Asked Questions
What's the difference between this and the RGB Illuminated Frame version?
Both versions have the same colour-changing RGB outer frame. This version also includes internal LED backlighting, so the printed graphic itself is illuminated. The RGB Illuminated Frame version lights the frame only and costs less.
How is this different from the iLLUMiGO™ 2x2m LED Fabric Lightbox?
Both are 2m x 2m backlit fabric lightboxes. illumiGLOW adds a colour-changing RGB outer frame with remote control and can also be reduced to 1.5m wide. If you only need a backlit graphic, the iLLUMiGO™ 2x2m is the simpler option.
Can I use it at both 1.5m and 2m wide?
Yes. The frame is supplied at 2m x 2m and can be converted to 1.5m x 2m by removing a frame section. You will need a graphic in each width you want to use.
Should I choose single or double-sided?
Choose double-sided if people will see both sides. For single-sided use, we supply a blockout liner for the reverse, which prevents light from escaping through the back and helps make the front graphic brighter.
Can it be used outdoors?
No. The lighting is rated IP20 and is designed for indoor venues.
What power does it need?
A standard mains socket. The unit draws 288W and comes with a 3m power cable fitted with an EU plug and a UK adapter.
How long does production take?
Typically around 4 working days from artwork approval. See the production lead time status on the product page for the latest production timelines.
