illumiGLOW RGB Illuminated Frame Display Stand – 1.5m / 2m Wide

A backdrop with a colour-changing frame

At 2m wide, this is a full backdrop for behind a counter, a presenter or a product demo. The illuminated RGB frame outlines the whole graphic in light, so your stand reads clearly from across the hall without needing a full lightbox.

Artwork is printed on polyester stretch SEG fabric using dye-sublimation for vivid colour and a smooth, tensioned finish. The unit draws 128W, well under half the power of the backlit LED lightbox version.

Two widths from one frame

The frame is supplied at 2m x 2m. Remove a frame section during assembly and it becomes a 1.5m x 2m display, for tighter stand spaces, smaller venues or retail areas where a full 2m width won't fit.

Each width uses its own graphic, so you can start with one size and add a second graphic later to use both configurations.

Full lighting control from one remote

Everything is set from the supplied handheld remote. No app or software is needed.

• Colour selection: Pick any colour from the touch-sensitive colour ring, or step through seven presets: red, orange, yellow, green, cyan, blue and purple.
• Dynamic effects: More than 60 colour effects and lighting modes, including a gradual colour fade, to add movement around the frame.
• Brightness and speed: Turn the frame up for a busy hall or down for a quieter room, and set how fast effects run.
• Saturation: Go from bold, vivid colour to a soft tint that sits quietly around your graphic.
• White light: Switch to white when you want a clean, neutral look, adjustable from warmer to cooler tones.
• Four-zone group control: Organise multiple illumiGLOW frames into four zones and control them from one remote, so every frame in a zone shows the same colour or effect at the same time.

The 2.4GHz RF remote control is supplied with every unit (requires 2 x AA batteries, not included).

Build a larger illuminated stand

Pair the wide frame with one or more illumiGLOW 1m units either side and group them in the same lighting zone. Every frame then changes colour and runs effects together, giving your whole stand one coordinated lighting scheme from a single remote.

Single or double-sided graphics

illumiGLOW is a double-sided frame. Choose double-sided graphics when the backdrop is visible from both sides, such as an island stand or a room divider. Choose single-sided graphics when it stands against a wall or at the back of your stand.

Tool-free assembly and a protective wheeled case

Assembly is tool-free, using easy-latch connections and integrated twist-out feet. When the event is over, the frame packs into a heavy-duty ABS hard-shell case with protective EVA foam inserts, wheels and carry handles, so it travels and stores safely between shows.

What's included

• Aluminium illumiGLOW frame with 40mm RGB illuminated outer frame (configurable to 1.5m x 2m or 2m x 2m)
• Integrated twist-out feet
• Support rod to keep the graphic taut
• Power supply with 3m mains cable (EU plug with UK adapter)
• 2.4GHz RF remote control (2 x AA batteries not included)
• Dye-sublimated polyester stretch SEG graphic: 1 for single-sided, 2 for double-sided
• Heavy-duty ABS hard-shell case with EVA foam inserts, wheels and handles